 |
7&10-30LP8 125MPH VERSION |
 |
| Model | 7-10-30LP8 125MPH Version |
| Frequency range | 10 to 30 MHz continous and a separate frequency tunable from 6.6 to 8.4 MHz |
| Typical gain | 6 dBd 10-30 MHz and 3 dBd @ 7 MHz |
| Front to back, Typical | 15 dB 10-30 MHz and 6 dB @ 7 MHz |
| Beamwidth | 65° E and 75° in H plane |
| Feed impedance | 50 Ohms unbalanced into 4:1 Balun |
| VSWR | 1.8:1 |
| Input Connector | SO-239 standard. N type available |
| Power Handling | 3 kW standard, Higher available |
| Boom length / diameter | 30 Ft / 3.0" X .125 wall |
| Maximum element length | 49.66 Ft. |
| Turning radius | 28 Ft. |
| Wind Area / Survival | 15 Sq. Ft. / 125MPH |
| Weight / ShipWt. | 125 lbs / 140 lbs TRUCK ONLY |
This special "skip frequency" hybrid log periodic is part of our rugged SURVIVOR SERIES of logs and Yagis. Aside from the fact that it will survive the worst that Mother Nature can do, it is a versatile performer. Commercial and Government users need frequency agility and this antenna privides immense bandwidth and performance for the cost. For the Amateur radio operator it covers SEVEN Amateur Bands with high efficiency and no traps! Machined aluminum element to boom clamps and solid fiberglass rod center insulators are just a few of the unique structural features in this remarkable antenna. The 7 &10-30LP8 125MPH Version is a single, economical antenna system that matches up with todays modern solid state equipment and keeps you competitive on every frequency on every band instantaneously. Low windload and less weight put less demands on the rotator and tower structures.
Maritime, Government, Commercial, MARS, Scientific and Amateur users are finding the 7 &10-30LP8 125MPH Version reliably fills a variety of communication requirements. When properly installed at 65 feet or higher this eight element antenna is a world wide, world-class performer. Solid electrical and structural design will maintain communications when other antennas have long since faded into the noise.
http://www.m2inc.com email:sales@m2inc.com