RC2800PXAZ, AZ CONTROL UNIT

FEATURES:

The M2 RC2800PXAZ is our Economy Grade single axis controller. The RC2800PXAZ was developed for the M2 Azimuth Motor Model (OR2800PX) and our “Commercial Grade” AZ/EL Pedestal Models (AE1000) & (AE1000CB). The M2 RC2800PXAZ uses a Microchip PIC16F876/20-SP for Micro processing user commands, M2 software and EEprom for memory. User modes include: (3) Operational / Run Modes and (17) configurable modes including (10) programmable presets. New switching power supply allow operation from 86 ~ 264VAC input. The M2 RC2800PXAZ uses PWM (Pulse Width Modulation) for speed control, allowing for full torque at the slowest input speed. Location heading from the motor assembly is supplied via an Open Loop Circuit to the controllers’ microprocessor. Many off the shelf software packages are available that support the M2 Software Protocol, including Ham Radio Deluxe, SATPC 32 and NOVA for window.

Computer interface to the RC2800PXAZ is via RS232.

*Note: Depending upon the vintage of your control unit, there is a Software Download available for the most recent software. 

This is a free software download which includes the following. Bootloader, 2.4.5.Hex File and Instructions. Add the product to your cart and complete the order. Use the coupon code "DOWNLOAD" and the product is free. Once you have completed your cart, the Bootloader, 2.4.5.Hex File and instructions will be available for download.