The M2 RC2800PRKX2SU is our Mid Grade rack-mount controller. The RC2800PRKX2SU was developed for “Commercial Grade” AZ/EL Pedestal Models (AE1000, AE1000CB and AE1000CBW)*Also available for a (3) Axis System. The M2 RC2800PRKX2SU uses a Microchip PIC18F2520-I/SP for Micro processing user commands, M2 software and EEprom for memory. User modes include: (3) Operational / Run Modes and (10) programmable presets. The M2 RC2800PRKX2SU uses a Meanwell switching power supply so 115VAC or 230VAC can be used for the main power input with no switching needed. The M2 RC2800PRKX2SU uses PWM (Pulse Width Modulation) for speed control, allowing for full torque at the slowest input speed. Location heading from the motor assembly is supplied via an Open Loop Circuit (Pulse) to the controllers’ microprocessor. The M2 RC2800PRKX2SU software was developed for a commercial customer. A full GUI software for setup and run modes and a Interface Control Document (ICD) is supplied with the RC2800PRKX2SU.
Computer interface to the RC2800PRKX2SU is via (2) individual RS232 ports or as an option (2) USB ports.
*Note: Depending upon the vintage of your control unit, there is a Software Download available for the most recent software.
This is a free software download which includes the following: Tinybootloader, M2 Setup Utility and M2 Sat 1.4 software. Add the product to your cart and complete the order. Use the coupon code "DOWNLOAD" and the product is free. Once you have completed your cart, the Tinybootloader, M2 Setup Utility and M2 Sat 1.4 software will be available for download.